Grandstream Networks GXP1760 Administration Manual page 34

Specifies the function of mute key in idle. Default setting is "DND". When select
Mute Key Functions "Idle Mute" and press Mute key while idle, the future incoming call will be answered
While Idle with mute. When select "Disabled", Mute key will not take effect while idle. The
default setting is "No".
Disable Transfer Disables the Transfer function. The default setting is "No".
In-call dial number Configures the number for the phone to dial as DTMF during the call using TRAN
button.
on pressing transfer
key
If set to "Yes", the phone will use attended transfer by default. The default setting
Auto-Attended
Transfer is "No".
Specifies whether to replace # by %23 or not for some special situations. The
Do Not Escape #
as %23 in SIP URI default setting is "No".
Enables Click-To-Dial feature. If this feature is enabled, user could click the green
Click-To-Dial
dial button on left top corner of phone's Web GUI, then choose the account and
Feature
dial to the target number. The default setting is "Disabled".
Call History Flash
Defines the interval (in seconds) to save the call history to phone's flash. 0
Writing: Write
means this option is disabled. The default value is 300 seconds.
Timeout
Defines the number of unsaved logs before written to phone's flash. 0 means
Max Unsaved Log
this option is disabled. The default value is 200 entries.
This option is used for users to set the default call log list after select
Default call log type
MENUCALL HISTORY. Broadsoft Call Log or Local Call Log option will only
show its own list. Default option will keep both call log lists.
Return Code When
Refusing Incoming
Send selected type of SIP message to the call when refusing the incoming call.
Call
Return Code When
Send selected type of SIP message when enabling DND.
Enable DND
Local Call
Enables/Disables the ability to record calls locally while on the call screen. The
Recording Feature
default setting is "Disabled"
Saved Local Call
Defines the location where the recordings will be stored, either on the internal
Recording Location storage or on the connected USB. Default setting is "Internal Storage"
Download Local Call
When there are recordings presented, you may download them here.
Recordings
Configure the prefix in the "User-Agent" header.
User-Agent Prefix
Settings  Multicast paging
During active call if incoming multicast page is higher priority (1 being the highest)
Paging Barge
than this value the call will be held and multicast page will be played. The default
GXP17xx Administration Guide
P a g e | 33