Grandstream Networks GXP1760 Administration Manual page 17

802.1X
o
Enables/Disables 802.1X mode, Configures 802.1x identity and MD5
password.
Layer 2 QoS
o
Configures LAN port 802.1Q/VLAN Tag and priority value. Select "Reset
Vlan Config" to reset VLAN configuration on the LAN port.
PC Port Mode
o
Selects PC port mode (Enabled/Disabled/Mirrored). Configures PC port
802.1Q/VLAN Tag and priority value.
OpenVPN Settings
o
Enable/Disable OpenVPN, configure OpenVPN server and port.
IPv6 Settings
o
Selects IPv6 mode, Auto-configured or Statically configured (Full Static
/ Prefix Static).

Upgrade
Firmware Server
o
Configures firmware server for upgrading the phone.
Config Server
o
Configures config server for provisioning the phone.
Config Upgrade Via
o
Allows users to choose the provisioning method: TFTP, HTTP or HTTPS
for configuration file download.
Firmware upgrade via
o
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS for firmware file download.

UCM Detect
Detect/connect UCM server to process auto-provision. Manually input
the IP and port of the UCM server phone wants to bind with, or select
from the available UCM server in network.

Factory Functions
Audio Loopback
o
Speak to the phone using speaker/handset/headset. If you can hear
your voice, your audio is working fine. Press "Exit" softkey to exit audio
loopback mode.
Diagnostic Mode
o
All LEDs will light up. Toggle the line keys LED color to green with "#"
GXP17xx Administration Guide
P a g e | 16