Job Accounting - Lexmark W820 User Manual

Job Accounting

Purpose:
To store statistical information about your most recent print jobs on the hard disk. The statistics include
whether the job printed with or without errors, the print time, the job size (in bytes), the requested
paper size and paper type, the total number of printed pages, and the number of copies requested.
Values:
See also:
Job Acct Limit
Purpose:
To specify the number of print jobs for which statistics are maintained on your printer hard disk.
Values:
If you set Job Acct Limit to 10, the statistics from the 10 most recent print jobs are stored on the hard
disk. When the limit is reached, statistics for the oldest print job are discarded and replaced with the
statistics from the current print job. If you change the Job Accounting Limit, all job statistics currently
stored on the hard disk are deleted.
See also:
Downloaded From ManualsPrinter.com Manuals
Off* Printer does not store job statistics on disk.
On Printer stores job statistics for the most recent print jobs.
Note: Job Accounting is only displayed when a hard disk is installed, is neither defective
nor Read/Write or Write protected.
Job Acct Limit, Job Acct Stat
Disabled Stores statistics for each print job until the hard disk is full.
10...1000 (1000*) Stores statistics for the specified number of print jobs.
Note: Job Acct Limit is only displayed when a hard disk is installed, is neither defective
nor Read/Write or Write protected, and Job Accounting is set to On.
Job Accounting, Job Acct Stat
229