Before First Use - AEG KS8454801 User Manual

10 www.aeg.com
Symbol

6. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
6.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
6.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
Water hardness
Class
1
2
3
4
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the four colour change strip
supplied with the steam set in the
oven.
Weight Automatic
Heat + Hold
Calcium deposit
(mmol/l)
dH
0 - 7 0 - 1.3
7 - 14 1.3 - 2.5
14 - 21 2.5 - 3.8
over 21 over 3.8
Function
The display shows that the automatic
weight system is active or that weight
can be changed.
The function is active.
set the language, the display contrast,
the display brightness and the time of
the day.
1. Press or
2. Press to confirm.
6.3 Setting the hardness level
for the water
When you connect the appliance to the
mains, you have to set the water
hardness level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Calcium deposit
(mg/l)
0 - 50
50 - 100
100 - 150
over 150
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3. Shake the strip to remove the excess
of the water.
to set the value.
Water classi-
fication
Soft
Moderately
hard
Hard
Very hard