Table of Contents
Advertisement
5. Cold storage of the bags is
mandatory in case the cooking
procedure is not done immediately.
6. Continue with the function: SousVide
Cooking following applicable
cooking table indications for the
considered type of food or the
assisted cooking recipes.
7. Open the pouch and serve.
8. Optional: finish the food with a final
searing or grilling e.g. for meat to
achieve a nice crust and the typical
roast flavour.
Activating a function: SousVide
Cooking mode
1. Activate the appliance.
2. Select the menu: SousVide Cooking.
3. Press
to confirm.
4. Set the function: SousVide Cooking
mode.
5. Press
to confirm.
6. Set the temperature.
7. Press
to confirm.
Cooking with this function
causes residual water on the
vacuum bags and in the
cavity. After the cooking
process open the door
carefully to avoid the water
dropping on the furniture.
Use a plate and a towel to
take out the vacuum bags.
Dry out the door, the water
drop collector in the bottom
and the cavity with a soft
cloth or a sponge. Let the
appliance dry fully with the
door open. To speed up the
drying you can heat up the
appliance with hot air at
temperature 150 °C for
approximately 15 minutes.
7.13 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
7.14 Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold
seconds. The heat-up indicator
alternates.
7.15 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
ENGLISH
23
for 3
Advertisement
Table of Contents
