Front Panel Keyboard Operation; Vsp 516 Series Operator Guideline - RGBlink VSP 516 Series User Manual

4.0 Front Panel Keyboard Operation

Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last setting
config and send processed image to the target monitor. For the first setup, CV1
input is default source. With front panel keyboard, user can operate VSP with
menu display on LCD module.

4.1 VSP 516 series Operator Guideline

VSP 516 series front panel as following：
1. LCD Module;
2. Keyboard:
ESC: push to exit from current choice item;
SEL: push to confirm the current choice item;
UP: push to select up items in LCD menu;
DOWN: push to select down in LCD menu;
LEFT：push to select the left items
RIGHT：push to select the right items
CV1：switch to composite 1 input
CV2：switch to composite 2 input；
CV3：switch to composite 3 input；
SVID：switch to SVideo；
VGA: switch to analog RGB input；
YPbPr: switch to high definition component，
VSP 516 Series User Manual 9