RGBlink VSP 516 Series User Manual page 17

SEL to confirm the relevant items;
Step：user can set the step of scale;
HSize：set the horizontal size of the image;
VSize：set the vertical size of the image;
HPos：set the horizontal position of the image;
VPos：set the vertical position of the image；
Scale
> Step
When shown in one single image, the ratio between the
horizontal and the vertical of the image should be equal to or
less than 3.
When shown in dual image, there is a limit of aspect ratio of the
Note:
image in the left side: The horizontal of the image in the left
side should be larger than that of the image in the right side.
This rule still need to be followed even if the images are dragged
to the opposite.
Push the FRE to freeze the live image or live the freeze image.
Freeze Frame
Once gain for live
OR：
Live Frame
Once gain for live
Push BRT to set the brightness and the contrast ratio:
VSP 516
Brightness
OR：
VSP 516
Contrast
Push SAVE and then push SAVE1 or SAVE2 to save the operation to SAVE1 or
VSP 516 Series User Manual
10
50 ↓
50 ↑
15