RGBlink VSP 516 Series User Manual page 12

DVI: Switch to DVI input
+:Switch to amplify the audio;
-:Switch to down scale the audio;
SDI: SDI input, compatible with HD/SD SDI, push to switch to SDI input;
VSP 516S can install a SDI input module to support SD-SDI and
Note: HD-SDI signal, compared to VSP 516 and VSP 516H.
PBP:Switch to show two pictures in side by side mode;
VSP516S front panel remove PBP mode button to SDI button;
Note: VSP516 and VSP516H front panel keep PBP mode button, but
remove SDI button.
PIP:Switch to show picture in picture on the screen. CV1 is the default
small picture on the top left corner, DVI is the default picture with full screen.
SAVE1：switch to use the user-defined mode 1;
SAVE2：switch to use the user-defined mode 2;
SAVE3：switch to use the user-defined mode 3;
FS：switch to selet full screen or zoom view, just for single picture mode;
RATIO：switch to select aspect ratio 4：3 or 16：9;
MSA：switch to select the audio channel which send to output in multi
picture mode;
MUTE：Switch to select mute sound or return;
MENU:push to go to main menu;
FRE:push to freeze the video image or live again;（Freeze Live Freeze）
AB: Channel Switch, only works under the PBP mode. Push it to switch between
VSP 516 Series User Manual 10