RGBlink VSP 516 Series User Manual page 15

*Alpha
Port A Value：
Push OUT to enter the Output menu, push the UP or DOWN to select
different output resolution, push OK to confirm the output resolution.
Advance submenu as follows：
VSP516H and VSP 516S support the minus pixel shift
function, which VSP 516 can not support;
Note: VSP516H and VSP 516S can not support pixel shift on the
resolution 1920×1080P×60Hz.
Pixel shift to minus:
Press UP/DOWN and select the menu as shown in Figure 1:
>VSP 516
*Advance
Press LEFT/RIGHT and select XY_Pos to enter the submenu of adjusting
effective area;
H_BLANK
*HS:
V_BLANK
*VS:
XY_Pos：The sub-menu of which is used to adjust the position of overall
effective area shown on the screen or monitor.
H_BLANK: The overall effective area can be moved around by adjusting the
value of H_BLANK.
V_BLANK: The overall effective area can be moved up and down by
adjusting the value of V_BLANK.
Screen parameter:
Hsize:
Step：user can set the step of scale;
HSize：set the horizontal size of the image;
VSP 516 Series User Manual
100
XY_Pos ↑
Figure 1
46
38
1024
13