RGBlink VSP 516 Series User Manual page 16

VSize：set the vertical size of the image;
HPos：set the horizontal position of the image;
VPos：set the vertical position of the image；
User can set size and position of the screen simply, Mainly applies to LED
screens users. After setting screen parameter， the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen。
>1024x768x60
Push the / to enter Single or Dual channel menu , push the UP / DOWN to
select the single or dual channel, push SEL to confirm the single channel or dual
channel work state;
Select the input channel, push the UP/DOWN, and SEL to confirm the
different input channel. User can also push the channel name on the
keyboard to go into the input channel.
Source Select
>CV1
AB in VSP 516 is used to enable channel if dual channel mode.
Setup
A on B
OR：
Setup
A on B
Push SCALE to set the size and position of the image, push UP/DOWN and
VSP 516 Series User Manual
Output
Setup
Dual
Setup
Single
14