Bypass Feed Copying with the Document Feeder
Bypass Feed Copying with the Document Feeder
You can use the document feeder with the bypass feed entrance. Follow these
steps.
F
Do not insert the copy paper into the bypass feed entrance before turning on the main
switch. If you do, J1 and
feed entrance, then reinsert it.
OPTIONAL DOCUMENT FEEDER
will light. In this case, take out the paper from the bypass
1.
Set the stack of originals into the
original table following steps 1 to 5
on pages 21 and 22.
2.
Insert a sheet of copy paper into the
bypass feed entrance following
steps 2 and 3 on page 11.
When the sheet of paper is com-
pletely in, the original will also be
fed in, and copied.
3.
After the Start key turns green, in-
sert the next copy paper into the
bypass feed entrance.
4.
Repeat step 3 until your copying is
completed.
23