Ricoh A151 Operating Instructions Manual page 94

TROUBLESHOOTING
When there is a paper misfeed, a misfeed location number (PE, J0, J1, or
N
J2 ) is displayed in the copy counter. If J0, J1 or J2 is displayed, the Check
Paper Path (
Reduce Create Margin 93% Enlarge
11
x15
11 x17
Do not leave any torn scraps of paper within the copier.
After removing the misfed paper, make sure that all units are returned to their
original positions and the top unit and front cover are closed.
When a paper misfeed occurs, the copier keeps track of the selected copy modes
and how many originals have been completed. It is not necessary to reset the
copy modes and the copy quantity after removing misfed paper.
Repeat the procedures described in this section until the Check Paper Path indi-
cator and misfeed location number (PE, J0, J1, or J2) go out. (The indicators do
not function unless the front cover is closed.)
Do not open the front cover after the misfeed condition is cleared. (The copier's
memory will be erased if you do.)
If you have a document feeder, make sure to use the top unit stand to keep the
top unit open.
!"
) indicator will also light. Remove misfed paper as follows.
129%
1
8 11 74% 121%
x
2
1
8 x 11 65%
2
PE: See page 35.
J1: See page 37.
J2: See page 39.
J0: See page 42.
%
*Illustration shows type 2.