You can use the document feeder with the bypass feed entrance. Follow
these steps.
Do not insert the copy paper into the bypass feed entrance before turning on the
main switch. If you do, J1 and
the bypass feed entrance, then open the front cover and close it.
Set the stack of originals into the
original table following steps 1 to
5 on pages 23 and 24.
Insert a sheet of copy paper into
the bypass feed entrance follow-
ing steps 2 and 3 on pages 12
and 13.
When the sheet of paper is com-
pletely in, the original will also be fed
in, and copied.
After the Start key turns green,
insert the next copy paper into
the bypass feed entrance.
Repeat step 3 until your copying
is completed.
OPTIONAL DOCUMENT FEEDER
N
will light. In this case, take out the paper from
%