Ricoh A151 Operating Instructions Manual page 92

USER TOOLS
As a default setting, the reduction ratios are selected at first when pressing
the Reduce/Enlarge key. (e.g. Metric version: 100 % → 93 % → 82 % →
71 % → 141 % → 122 %. See page 14.) You can cancel this setting and
give priority to the enlargement ratios. (e.g. Metric version: 100 % → 122 %
→ 141 % → 71 % → 82 % → 93 %)
Default: Reduction ratios (Setting: 0)
Setting
0
1
As a default setting, Auto Image Density is selected. You can cancel this
setting to set Manual Image Density mode as the default mode.
Default: Yes (Auto Image Density is selected.) (Setting: 0)
Setting
0
1
When you set one original at a time in the optional document feeder (SADF
mode), the Auto Feed indicator lights for a selected time after an original is
fed to show that the document feeder is ready for another original. You can
adjust this time.
Default: 5 seconds (Setting: 0)
Setting
0
1
!
Reduction ratios priority mode
Enlargement ratios priority mode
Yes (Auto Image Density is selected.)
No (Auto Image Density is not selected.)
5 seconds
60 seconds
Mode
Mode
Definition