Ricoh A151 Operating Instructions Manual page 93

You can adjust the Auto Image Density level to lighter and darker.
Default: Normal (Setting: 0)
Setting
0
1
2
As a default setting, when the copier is reset by the auto reset, the Energy
Saver is not automatically set. You can change this setting.
Default: No (Auto energy saver is not set.) (Setting: 0)
Setting
0
1
You can select one of four energy saving ratios. Note that the higher the
saving ratio is, the more time the copier will need to return to the ready
condition.
Default: Level 3 (Setting: 2)
Setting
0
1
2
3
Normal
Darker
Lighter
No (Auto energy saver is not set.)
Yes (Auto energy saver is set.)
Level 1 (The highest saving ratio)
Level 2
Level 3
Level 4
Definition
Modes
Definition
USER TOOLS
!!