Ricoh A151 Operating Instructions Manual page 72

COPYING
Use the bypass feed entrance to copy onto paper of a different size than
the one already in the paper tray.
One sheet should be inserted into the bypass feed entrance at a time.
Bypass feed copying also may be used for OHP transparencies, adhesive labels,
translucent paper, or post cards.
When you copy onto OHP transparencies or post cards, remove copied sheet
one by one.
When you copy onto OHP transparencies, insert them with the copy side up.
Regarding the bypass feed copying with the optional document feeder, see page
27.
Do not insert the copy paper into the bypass feed entrance before turning on the
main switch. If you do, J1 and
the bypass feed entrance, then open the front cover and close it.
Place the original face down on
the exposure glass, and lower the
platen cover.
The original should be centered ac-
cording to the size marks on the left
scale.
Slide the bypass feed guides to
the proper width.
Pull out the extender to support copy
paper larger than B4, 8
N
will light. In this case, take out the paper from
" x 14".
1/2