Mechanical Installation - ABB DCS800-EP Installation And Start-Up Manual

4
Fiber optic cables
WARNING! Handle the fiber optic cables with care. When unplugging optic
cables, always grab the connector, not the cable itself. Do not touch the ends
of the fibers with bare hands as the fiber is extremely sensitive to dirt. The
minimum allowed bend radius is 35 mm (1.4 in.).

Mechanical installation

These notes are intended for all who install the drive. Handle the unit carefully to
avoid damage and injury.
• DCS800-EP Frames A and B: The drives are heavy and may require more than
one person to lift. Use appropriate lifting techniques. Do not lift the unit by the
front cover. Place the unit only on its back.
• DCS800-EP Frames C and D: The drive is heavy. Lift the drive by the lifting lugs
only.
• Make sure that dust from drilling does not enter the drive when installing.
Electrically conductive dust inside the unit may cause damage or lead to
malfunction.
• Ensure sufficient cooling.
• Do not fasten the drive by riveting or welding.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
DCS800-EP Installation and Start-Up Manual