Canon EOS C700 Instruction Manual page 91

• Press [CENTER] (setup screen) or press the BACK button on the optional viewfinder to return the frame to
the center position.
3 You can also display a second frame around a different subject.
Setup screen: From the [Focus Assistance Functions] screen in step 1, [OPTIONS] > [Focus Guide] >
Monitoring menu: From the same submenu, [Display 2nd Frame] > [On]
• When the following screens are displayed on the control display, you can press SET to switch the focus
guide display from one frame to the other.
- The [AF] screen (
- The [Focus Asssistance Functions] screen (
[F. ASSIST.] > [
Focus farther Focus farther
(large adjustment) (small adjustment)
NOTES NOTES
• With subjects or in situations where autofocus may not work well (A 94), the focus guide may not work
correctly.
• The focus guide cannot be used in the following cases:
- While the focus is being adjusted automatically using one-shot AF or continuous AF.
- When the aperture value used is F11 or larger.
- When a manual focus lens is attached to the camera, except for compatible EF Cinema lenses (A 221).
[Camera Setup] > [Mount Adapter] is set to [MO-4E].
- When
• When the focus guide and face detection functions are used together, the focus guide may not focus the main
subject's eyes correctly, depending on the direction in which the face is turned.
Peaking
The camera offers two peaking levels.
1 Press the PEAKING button.
• Alternatively, you can press
monitoring menu you can use the
[MON.+HDMI Output] settings to turn the peaking on and off separately on the optional viewfinder or on
external monitors.
• On monitors connected to one of the MON. terminals or the HDMI OUT terminal, the peaking icon (J or
K) appears at the right of the monitoring screen and the outlines in the image will be emphasized,
depending on the focus.
• Press the button again to turn off peaking.
2 Open the peaking's [Select] submenu to select the peaking level.
[F. ASSIST.] > [OPTIONS] > [Peaking] > [Select]
Setup screen:
Monitoring menu:
3 Select the desired level and then press SET.
[Display 2nd Frame] > [On]
[AF]) and its [Move frame] screen (
FRAME])
In focus
[F. ASSIST.] > [PEAKING] to turn peaking on and off. From the
[Assist. Functions] (A) > [Peaking] > [VIDEO Output] and
[Assist. Functions] (A) > [Peaking] > [Select]
[AF] > [
[F. ASSIST.]) and its [Move frame] screen (
Focus closer Focus closer
(small adjustment) (large adjustment)
Adjusting the Focus
FRAME])
Cannot determine
adjustment
91