Exposure Compensation - Ae Shift; Light Metering Mode - Canon EOS C700 Instruction Manual

Adjusting the Aperture
NOTES NOTES
• Automatic aperture is not available when slow & fast motion recording is activated.
• The aperture value may change in the following cases.
82
- While using the built-in extender or iris compensation function of an EF Cinema lens, when you switch from
automatic aperture to manual aperture.
- When the aperture's onscreen display is changed between T values/F values.
- When the aperture controls on the lens are switched between automatic/manual mode.
• When using EF lenses/broadcast lenses that let you adjust the aperture gain, if the aperture gain is set too
high, the aperture adjustment may not be stable (aperture hunting), depending on the shooting conditions. In
such case, reset the lens's aperture gain to its initial value.

Exposure Compensation - AE Shift

Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the
image.
You can also perform this function remotely using Browser Remote on a connected network device (A 166,
172).
1 Open the [AE Shift] submenu.
HOME screen:
Monitoring menu:
2 Select an AE shift level and then press SET.
• Alternatively, you can press an assignable button set to [AE Shift +] or [AE Shift –] (A 127).
• You can select one of 17 AE shift levels from –2.0 to +2.0.
• The selected AE shift level will be displayed on the monitoring screen, next to the exposure bar, and the
camera will attempt to adjust the exposure accordingly.
The Exposure Bar
The Î on top of the exposure bar indicates optimal exposure without any shift
(AE±0); the scale markings indicate the deviation from optimal exposure in
1/2 EV increments. The indicator inside the exposure bar represents the current
exposure. When the difference between current and optimal exposure is larger
than ±2 EV, the indicator will flash at the edge of the exposure bar. Optimal
exposure will change depending on the light metering mode used.

Light Metering Mode

Select the light metering mode to match the recording conditions. Using the appropriate setting will ensure that
the camera obtains the most suitable exposure level when automatic aperture is used.
1 Open the [Light Metering] submenu.
[Camera Setup] (v) > [Light Metering]
2 Select the desired option and then press SET.
• Alternatively, you can press an assignable button set to [Backlight] or [Spotlight] (A 127).
• The icon of the selected mode (
screen.
[IRIS] > [OPTIONS] > [AE Shift]
[Camera Setup] (v) > [AE] > [AE Shift]
or , no icon for [Standard]) appears at the left of the monitoring
Optimal exposure AE±0
Current exposure