Canon EOS C700 Instruction Manual page 42

Preparing the Camera
Connecting and Adjusting the Optional Viewfinder
You can adjust the brightness, contrast, color, sharpness, and luminance level of the optional viewfinder. These
adjustments will not affect your recordings.
1 Connect the camera's VIDEO terminal to the
42
optional viewfinder's VIDEO terminal using an
optional UN-5 or UN-10 Unit Cable.
• Align the Í marks on the cable's plugs and the
terminals.
2 Put the unit cable through one of the cable
clamps on the clamp rail.
• The clamp rail has 4 screw holes for the cable
clamps so you can adjust their position as needed.
3 Turn on the camera and turn the dioptric adjustment
ring until the viewfinder's image is sharp.
4 Press the EVF button on the optional viewfinder.
• The monitoring menu will open with the [EVF-V70] submenu selected.
• Alternatively, you can press an assignable button set to [EVF-V70 Setup] (A 127).
5 Select [Brightness], [Contrast], [Color], [Sharpness] or [Luminance] and then press SET.
6 Select the desired level and then press SET.
• Repeat steps 5 and 6 to adjust other settings as necessary.
NOTES
• The optional viewfinder displays in color by default. You can set
[B&W Image] > [VIDEO Output] to [On] to set the viewfinder to black and white.
• By default, the optional viewfinder's screen will be dimmed automatically when it is not being used. You can
set [Eye Sensor] to [Off] to keep the optional viewfinder's screen always bright.
• When using one of the Canon Log gamma curves, you can apply a LUT to the image displayed on the optional
viewfinder (A 154).
[Monitoring Setup] (¢) >