Table of Contents
Advertisement
IMPORTANT
• When connecting an analog microphone or device that does not support phantom power, make sure to set
the corresponding INPUT switch to MIC or LINE, respectively. If you set the switch to MIC+48V, the
microphone or device may be damaged.
Selecting the Audio Input Source for Audio Channels
You can select the audio input source that will be recorded on CH1/CH2 or CH3/CH4, independently for each
pair of audio channels. For details refer to the
1 Select the desired pair of audio channels.
[AUDIO] > [CH1/2 IN] or [CH3/4 IN]
Setup screen:
Monitoring menu:
2 Select [INPUT Terminals] (external microphone or audio device), [MIC Terminal] (external
microphone) or [Monaural Mic] (built-in microphone) and then press SET.
• If necessary, repeat steps 1 and 2 to select the audio input source for the other pair of audio channels.
Recording a Single Analog Audio Input to Two Audio Channels
By default, when using analog audio sources (line in or microphone) connected to the INPUT terminals, each
audio input is recorded to a separate audio channel (INPUT 1 to CH1 and INPUT 2 to CH2).
If necessary (for example, as an audio backup recording), you can record the same analog audio source
connected to the INPUT 1 terminal to both audio channels, CH1 and CH2. In that case, you can adjust the audio
recording levels of each channel independently of each other.
1 Open the [CH2 Input] submenu.
[AUDIO] > [OPTIONS] > [Audio Input] > [CH2 Input]
Setup screen:
Monitoring menu:
2 Select the desired option and then press SET.
Options
[INPUT 2]:
Records audio to each channel separately. Analog audio input into INPUT 1 is recorded to CH1,
while audio input into INPUT 2 is recorded to CH2.
[INPUT 1]:
Analog audio input into INPUT 1 is recorded to both channels. Audio input into INPUT 2 will not
be recorded.
Adjusting the Audio Recording Level
When a channel is set to an analog audio input, you can select the automatic audio recording level adjustment or
adjust the audio level manually, independently for each channel. When a channel is set to a digital audio source
or the built-in monaural microphone, the audio recording level cannot be adjusted.
Repeat the following procedure as necessary to adjust the audio recording level for the audio channels used.
1 Open the [Audio Rec Level] screen/submenu of the desired audio channel.
[AUDIO] >[REC LEVEL] > Desired audio channel(s) ([CH1] to [CH4], [CH1/2],
Setup screen:
Monitoring menu:
Audio Settings and Recorded Audio Channels
[Audio Setup] (¡) > [Audio Input] > [Select CH1/2 Input] or [Select CH3/4 Input]
[Audio Setup] (¡) > [Audio Input] > [CH2 Input]
[CH3/4])
[Audio Setup] (¡) > [Audio Input] > [Audio Rec Level CH1] to
[Audio Rec Level CH4], [Audio Rec Level CH1/2] or [Audio Rec Level CH3/4]
Recording Audio
111
table (A 108).
Hide quick links:
Advertisement
Table of Contents
