Setting The User Bit - Canon EOS C700 Instruction Manual

Setting the User Bit

Setting the User Bit
The user bit display can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
104
letters A to F.
If user bit information is being received along with an external time code, you can also record the external user bit
with XF-AVC clips (A 106).
1 Open the user bit setting screen.
Setup screen:
Monitoring menu:
* To reset the user bit to [00 00 00 00], select [Reset] instead.
• The user bit setting screen appears with an orange selection frame on the leftmost character.
2 Set the desired user bit using the keyboard screen (A 37).
• Setup screen only: Press [RESET] to reset the user bit to [00 00 00 00].
To use the date or time as user bit
1 Open the user bit [Type] submenu.
Setup screen:
Monitoring menu:
2 Select [Time] or [Date] and then press SET.
[UB] > [SET UB]
[System Setup] (B) > [User Bit] > [Type] > [Setting] > [Set]*
[UB] > [OPTIONS] > [Type]
[System Setup] (B) > [User Bit] > [Type]