Custom Picture Settings; Selecting Custom Picture Files; Editing A Custom Picture File's Detailed Settings - Canon EOS C700 Instruction Manual

Custom Picture Settings

The camera lets you change many settings (A 134) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 20 custom picture files (in the camera or on an SD card), and load them later to
apply exactly the same settings (A 133). You can also save the custom picture file as part of the metadata
recorded with XF-AVC clips (A 133).
Custom picture settings have no effect during RAW video recording/output.
NOTES
• Custom picture files are exclusively compatible for use only with C700 / C700 PL / C700 GS PL cameras.

Selecting Custom Picture Files

Select a custom picture file to apply its settings to your recordings or to edit, rename, protect, or transfer it.
1 Open the custom picture file's selection screen.
HOME screen:
Monitoring menu:
2 Turn the SELECT dial to select the desired file and then press [OK] (HOME screen) or press SET
(monitoring menu).
• Select one of the custom picture files saved in the camera (C1 to C20). To use the settings of a custom
picture file saved on an SD card, copy the file to the camera in advance (A 133).
• When you close the menu, the selected custom picture file's settings will be applied. The [Gamma] and
[Color Space] settings currently in use are displayed under [COLOR] in the HOME screen and their icons will
appear at the left of the monitoring screen.
• If editing of the custom picture file's detailed settings ([Other Settings] > [Activate]) was enabled (A 131),
will appear at the left of the monitoring screen.
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- When an optional RC-V100 Remote Controller is connected to the camera, you can press the remote
controller's CUSTOM PICT. button to open the monitoring menu's [Custom Picture] (/) submenu.
- If a protected custom picture file is selected on the camera, custom picture related settings cannot be
changed using the remote controller.
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file. If you want to keep an important custom picture file, copy it
in advance to an SD card or select in advance a custom picture file you do not mind changing.

Editing a Custom Picture File's Detailed Settings

1 Turn off the preset color settings.
HOME screen:
Monitoring menu:
2 If necessary, change the gamma curve, color space and/or color matrix (A 134).
HOME screen: From the same submenu select [Gamma]/[Color Space]/[Color Matrix]; select the desired
Monitoring menu: Select [Main Settings] > [Gamma] /[Color Space]/[Color Matrix]; select the desired setting
[COLOR] > [CP OTHERS] > [File] > [Select]
[Custom Picture] (/) > [File] > [Select]
[COLOR] > [CP MAIN] > [Preset] > [Off]
[Custom Picture] (/) > [Preset] > [Off]
setting and then press SET.
and then press SET.
Custom Picture Settings
131