Transferring Clips (Ftp Transfer) - Canon EOS C700 Instruction Manual

FTP File Transfer

Transferring Clips (FTP Transfer)

After connecting the camera to a network (Wi-Fi (Infrastructure) or wired (Ethernet)), you can transfer to the FTP
server, XF-AVC Proxy clips recorded on the SD card.
182
1 Open the PLAY screen for sub recordings (XF-AVC Proxy) on the SD card.
[PB MEDIA] > [SD Card (XF-AVC)]
2 Open the clip selection screen.
[OPTIONS] > [FTP Transfer]
• The last XF-AVC Proxy clip recorded will be selected.
3 Select all the XF-AVC Proxy clips you wish to transfer.
• Turn the SELECT dial to select a clip. Press SET to mark a clip for transfer (a check mark will appear next to
the clip name). Press SET again to remove the check mark.
• You can press [SELECT ALL] to mark all the clips for transfer, or [CLEAR] to remove the check marks from
all the clips marked for transfer.
4 Once you have selected all the desired clips, press [OK].
• All the applicable clips will be transferred to the FTP server. When using an Ethernet connection, the
(Ethernet) access indicator will flash quickly while the files are being transferred.
• Press [CANCEL] to cancel the transfer while it is in progress.
5 When the confirmation message appears, press [OK].
IMPORTANT
• Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and
incomplete files may remain at the transfer destination.
- Do not open the SD card slot cover.
- Do not remove the power source or turn off the camera.
• If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete
before deleting them.
NOTES NOTES
• Depending on the access point's settings and capabilities, it may take some time to transfer files.
• You can also transfer the clip that is selected in the PLAY screen using the monitoring menu's
Setup] (B) > [Network Settings] > [FTP Transfer] > [Activate] setting.
[System