Using Anamorphic Lenses - Canon EOS C700 Instruction Manual

Using Anamorphic Lenses

Using Anamorphic Lenses
You can attach an anamorphic lens to the camera and set the anamorphic desqueeze ratio used to display the
image from the camera on monitoring devices while shooting or during playback.
122
1 Open the [Anamorphic] submenu.
2 Select [VIDEO Output] and/or [MON.+HDMI Output], select [On] and then press SET.
• Alternatively, you can press an assignable button set to [Anamorphic: VIDEO] (optional viewfinder only),
[Anamorphic: MON.+HDMI] (external monitors only) or [Anamorphic] (all monitoring devices at once)
(A 127).
3 From the same submenu select [Desqueeze Ratio].
4 Select the desired option and then press SET.
• You can select a fixed desqueeze factor (x1.3 or x2.0) or use the lens's squeeze factor as defined in the
metadata ([Lens Squeeze Factor]).
NOTES NOTES
• You can record the lens's squeeze factor in the clip's metadata with the
[Metadata] > [Lens Squeeze] setting.
• In the following cases the image from the camera will not be desqueezed.
- When the HDMI OUT terminal's resolution is set to 4096x2160 or 3840x2160, the image will not be
desqueezed on the monitor connected to the HDMI OUT terminal.
- During photo playback.
- The camera's live view image in the Browser Remote application.
[Monitoring Setup] (¢) > [Anamorphic]
[Rec/Media Setup] >