Adding An $ Mark Or % Mark While Recording - Canon EOS C700 Instruction Manual

Adding an $ Mark or % Mark while Recording

After making an important recording, you can add an OK mark ($) or check mark (%) to the clip (XF-AVC clips
on the CFast card only) to flag it and set it apart. You can use the $ mark to protect important clips, as clips
with an $ mark cannot be deleted using the camera.
To add an $ mark or % mark to a clip, you must first set in advance an assignable button to [Add $ Mark] or
[Add % Mark].
1 Set an assignable button to [Add
• To add both types of clip marks (to different clips), set one assignable button to [Add $ Mark] and another
assignable button to [Add % Mark].
2 When you finish recording a clip you wish to mark, press the assignable button.
• A message indicating the clip mark will appear on the monitoring screen and the selected clip mark will be
added to the XF-AVC clip.
NOTES NOTES
• A clip cannot have both an $ mark and a % mark at the same time.
$ %
Mark] or [Add Mark] (A 127).
Adding an $ Mark or % Mark while Recording
117