Inserting The Lithium Button Battery; Installing An Extension Module - Canon EOS C700 Instruction Manual

Preparing the Backup Battery

Inserting the Lithium Button Battery

The camera features a built-in backup battery so the camera settings are not lost while you replace the lithium
button battery.
24
1 Make sure no power supply is connected to the DC IN 12V
terminal.
2 Turn the lithium battery compartment cover to the OPEN
position and remove the cover.
• Use a coin or a similar tool. If you keep turning the cover beyond
the OPEN point, the cover will rise a little, making it easier to grab.
3 Insert the supplied lithium button battery with the + side
facing out.
4 Replace the cover and turn it to the LOCK position to lock it.
NOTES
• The built-in backup battery will be completely depleted if you do not
use the camera for about 1 month. Replacing the lithium button
battery in such case will reset all the camera's settings to default
values. To avoid losing the settings, you can save them on an SD
card in advance (A 140).
• To recharge the built-in backup battery, turn off the camera and connect a sufficiently charged power source
(battery or DC IN 12V terminal). The built-in backup battery will be fully charged in about 24 hours.

Installing an Extension Module

The following procedure is explained using the battery adapter for V-mount batteries supplied with the camera
as example.
1 Slide the battery adapter release switch in the direction of the arrow.
• The locking lever will pop out. Once it does, pull the locking lever all the way up.
2 Attach the battery adapter to the camera and slide it down.
• Align the positioning protrusions on the battery adapter with the holes on the camera's body.
3 Gently press the battery adapter toward the camera.