Dell S4820T Configuration Manual page 1019

show interfaces interface
– interface: specify one of the following interface types:
* For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/
port information.
* For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
* For a port channel interface, enter the keywords port-channel then a number.
Examples of the show vlt and show spanning-tree rstp Commands
The following example shows the show vlt backup-link command.
Dell_VLTpeer1# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received: 1025
Dell_VLTpeer2# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received: 1014
The following example shows the show vlt brief command.
Dell_VLTpeer1# show vlt brief
VLT Domain Brief
------------------
Domain ID:
Role:
Role Priority:
ICL Link Status:
HeartBeat Status:
VLT Peer Status:
Local Unit Id:
Version:
Local System MAC address:
Remote System MAC address:
Configured System MAC address: 00:0a:0a:01:01:0a
Remote system version:
Delay-Restore timer:
Dell_VLTpeer2# show vlt brief
VLT Domain Brief
------------------
Domain ID:
Role:
Role Priority:
Virtual Link Trunking (VLT)
10.11.200.18
Up
1
3
34998
1026
10.11.200.20
Up
1
3
34998
1030
1000
Secondary
32768
Up
Up
Up
0
5(1)
00:01:e8:8a:e9:70
00:01:e8:8a:e7:e7
5(1)
90 seconds
1000
Primary
32768
1019