Table of Contents
Advertisement
3. Setup Your Build And Print
Now that your printer is clean, you need to open up the 3D file
using ZPrint, and select your printing parameters.
1.
If you have not already done so, start ZPrint and select File
> Open. Choose a file to print.
2.
Check your printer settings.
•
Select File > 3D Print Setup, or click
bar to open the 3D Print Setup dialog.
•
Check your Printer Selection, the Powder Type
(zp150) and Layer Thickness setting (0.004" or
.1mm).
3dscentral.3dsystems.com
•
Check the Bleed Compensation option, if it isn't
checked already.
•
If you want to print all in one color, check the Print in
Monochrome option.
•
Click OK.
3.
ZPrint orients the part in the Build Bed for the fastest print
time. If you need to transform the part prior to printing, you
have a couple of options, otherwise proceed with Step 4.
on the Tool-
•
In the Top or Side views of ZPrint, select the part (left-
click on the part), then drag and drop it to a new posi-
tion.
•
In any ZPrint view, select the part and use the Justify
the orientation, or scale of the part.
, Rotate
, or Scale
features to change
7
Advertisement
Table of Contents
