Table of Contents
Advertisement
6.4 Clean The Rails and Carriage
Keeping the Rails and Carriage clean will keep the Carriage mov-
ing smoothly and thus optimize printing accuracy.
1.
Pull the Fast Axis toward you.
2.
Wipe the top
and bottom
Rails with a
paper towel
dampened
with distilled
water to
Parking Caps
remove any
powder. Move
the Carriage
Bottom Rail
back and forth
as needed to
clean the
entire length
of both rails.
3.
Using a clean, dry paper towel, thoroughly dry both rails.
4.
Using a fresh paper towel, wipe the Carriage to remove any
powder.
5.
Wipe or vacuum the Build Bed and Deck as needed to
remove any powder dislodged from the Rails and Carriage.
Important: Never vacuum up water - it will clog the vac-
uum system.
16
Top Rail
3dscentral.3dsystems.com
Advertisement
Table of Contents
