Clean The Service Station - 3D Systems ZPrinter 850 Quick Start Manual

6.5 Clean The Service Station

Clean the Service Station after every build to remove residue
buildup and to ensure the printer runs optimally for your next
print job. Before you begin:
• Get several dry paper towels and a cotton swab.
• Get the squirt bottle filled with distilled water.
• Wear disposable gloves.
• Get the Pick and Syringe from the Accessories Kit.
3dscentral.3dsystems.com
Clean Squeegee
Powder
Binder, ink
Clean Housing
Powder
Clean Spit Plate
Clean Deck and Bed
17