Table of Contents
Advertisement
2.
Open the printer top
cover. From the main
menu on the LCD
select
ACCESS
.
BUILD PLATE
3.
Raise the cart using
the foot-operated jack
so that the cart is level
with the bottom of the
build plate. Be careful
the cart is not too
low - it can damage the service station or the front of
the printer.
4.
Maneuver the part cart so that the front of the cart is adja-
cent to the build plate.
3dscentral.3dsystems.com
5.Using the handle,
pull the build plate up
and towards the cart
until it slides onto the
cart.
6.Move the cart to the
Powder Recycling Sta-
tion. Adjust the height
of the cart so it is level
with the opening of the
Station.
7.
Slide the build plate
carefully into the Pow-
der Recycling Station.
Alternatively, for small
parts, one can also
carefully move the
parts from the part
cart into the Station
by hand.
8.
Close the Powder
Recycling Station
glass cover.
9.
Close the printer top cover.
11
Advertisement
Table of Contents
