Floor - Arctic Cat HDX CREW 2017 Service Manual

2. Remove the push pins securing the front access
panel. Tilt the access panel back to access the inner
fender fasteners.
PR890A
3. Remove the remaining cap screws securing the inner
fender from the inside of the headlight assembly,
storage tray, and frame.
PR944A
INSTALLING
1. Install the inner fenders and secure using the existing
cap screws.
2. Install the access panel and secure with the push pins.
3. Secure the outer fenders to the vehicle using the
existing cap screws.

Floor

 NOTE: "First row" and "Second row" will be used
to help distinguish additional front and rear seat com-
ponents.
FRONT
Removing
1. Remove the front seat, first row center footrest, and
the steel support bracket located beneath the center
footrest.
HDX132A
2. Remove the cap screws securing both front side pan-
els.
HDX346A
3. Remove the screws securing the side panels to the
kick panel; then remove the cap screws securing the
kick panel to the frame. Remove the kick panel.
HDX265A
PR933
29