Dashboard - Arctic Cat HDX CREW 2017 Service Manual

CENTER
HDX344A
INSTALLING
1. Secure the latch to the frame with new cap screws
and lock nuts.
2. Install the front row plastic side panels (center); then
secure with the cap screws.
3. Install the front splash panels and front outer fenders;
then secure with the cap screws.

Dashboard

REMOVING
1. Remove the steering wheel, shift lever knob, and
front access panel.
PR890A
2. Remove the hood seal; then disassemble and remove
all four front fenders (outer fenders first).
HDX267A
34
HDX268A
3. Remove the cap screws around the perimeter of the
dashboard.
ROV-887
4. From under the dashboard, disconnect the accessory
plugs, override switch, drive select switch, and igni-
tion switch. Note the orientation of the connectors
for installing purposes.
5. Remove the instrument gauge from the dashboard
and disconnect it; then remove the cap screws secur-
ing the steel access plate on the driver's side behind
the dashboard. Disconnect the headlight switch con-
nector.
HDX269
6. Remove the upper cap screw and lock nut from the
tilt steering sub-assembly and support lift. Discard
the locknut.