Main Menu  Setting  Network  Connection; Main Menu  Setting  Network  Pppoe; Main Menu  Setting  Network  Ddns - Santec SCVR-2411K User Manual

User manual
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
7.5.2.2 Main menu  Setting  Network  Connection
Here you can adjust settings for:
Max. number of connection, i.e. users (max. 128)
TCP Port
UDP Port
HTTP Port
HTTPS Port
RTSP Port
Note:
If you change one of the above mentioned ports and don't keep the default port value, you
have to restart the recorder.
7.5.2.3 Main menu  Setting  Network  PPPoE
Enable the PPPoE function and enter the user name and password (will be supplied
by the Internet service provider).
Click on "Apply" and "OK".
Restart the recorder.
After the reboot, the recorder automatically connects to the Internet.
7.5.2.4 Main menu  Setting  Network  DDNS
To setup the DDNS, you need a PC with DDNS software installed or a fix IP address in the
Internet. The PC thus serves as a DNS (Domain Name Server).
Click on "Enable".
Select the DDNS type. The server IP will be assigned automatically.
Enter the domain name which you have received from your Internet service provider.
Click on „Apply" and „OK".
Restart the recorder.
After the reboot, open your Internet Explorer make the following entries:
o http://(DDNS server IP)/(virtual directory name)/webtest.htm
o Ex.: http://10.6.2.85/DVR _DDNS/webtest.htm.)
At the recorder, open the menu Network  DDNS
Quick DDNS:
The DDNS function allows you to access the recorder via the registered domain name.
The quick DDNS client has the same function as other DDNS client end. It realizes the
bonding of the domain name and the IP address. DDNS server is for our own devices only.
You need to refresh the bonding relationship of the domain and the IP regularly. There is no
user name, password or the ID registration on the server
_________________________________________________________________________________
- 37 -