Table of Contents
Advertisement
User manual
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
7.5.5.7 Main menu Setting System Import/Export
Here you can export or import data. This function is helpful if you wish to save the recorder
configurations to a stick and then use the stick to copy these configurations to another
recorder.
Please connect a USB device (e.g. stick) to the recorder.
The recorder identifies the stick and a window pops up with the following setting options:
File backup
Configuration backup
Log backup
System upgrade
Select the function you wish to execute.
In the Import/Export menu, click on "Apply" so that the stick is listed under "Device name".
Then select the stick. Its content is shown in the list.
Select the desired folder in the list and click on „Import" or „Export".
Use "New directory" to create a new directory/folder.
Use „Format" to format the USB stick, i.e. its content will be deleted.
Note:
Only USB sticks with FAT32 formatting are recognized by the recorder.
7.5.5.8 Main menu Setting System Default
Here you can reset individual or all settings to factory default settings. Tick the respective
item:
All
Camera
Event
System
Network
Storage
Note:
Resetting the settings to factory default also includes colour, language, time, video format, IP
address and user account.
7.5.5.9 Main menu Setting System Upgrade
Please connect a USB device (e.g. stick) to the recorder which contains the data you wish to
upload to the recorder (e.g. a new firmware).
Click on „Start" to start the upgrade process. As long as the upgrade process is running, the
recorder must not be switched off.
Once the update has been completed, please reboot the recorder.
_________________________________________________________________________________
- 49 -
Advertisement
Table of Contents
