Main Menu  Setting  Event; Main Menu  Setting  Event  Detect - Santec SCVR-2411K User Manual

7.5.3 Main menu  Setting  Event
7.5.3.1 Main menu  Setting  Event  Detect
Here you can adjust settings for:
Motion detection
Video loss
Video masking
Motion detection:
Select the channel by ticking "Enable" to activate the motion detection function.
Define the "Area" for the motion detection. Click into the grid to activate or de-activate
specific areas.
Use "Period" to define the days and times for motion detection and for corresponding
actions. This time frame is only valid for motion detection and not for other events
such as video loss or tampering.
Anti-dither time may vary from 5 to 600 seconds, indicating the duration of the alarm if
a motion has been detected, e.g. buzzer, tour, PTZ activation, snapshot creation or
recording. If, for example, you define the anti-dither time to 10 seconds, the buzzer,
the tour, etc. will be running for 10 seconds.
Define the type of action to be triggered in case of a detected motion: PTZ activation,
tour, snapshot, buzzer or recording.
Video loss:
In case of a video loss specific actions can be triggered for a defined period of time – as this
is the case for motion detection.
To define the tamper function, please proceed as described above for motion detection.
Video masking:
In case of a detected tampering (e.g. caused by manipulation of the camera, e.g. changing
its position or covering it) specific actions can be triggered for a defined period of time – as
this is the case for motion detection.
To define the tamper function, please proceed as described above for motion detection.
_________________________________________________________________________________
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
- 42 -
User manual