Important General Notes - Santec SCVR-2411K User Manual

1.3 Important general note
Please read the following instructions carefully.
1.3.1 Assembly and installation
On-site installation should only be performed by qualified maintenance personnel and
must meet local specifications and regulations.
Never operate the equipment without the respective protective cover near water, in dusty
rooms or extremely humid rooms. The equipment could be seriously damaged.
The openings on the equipment are intended for ventilation purposes and protect from
overheating. Never cover or close off these openings. Rack mounting is only permissible
if sufficient ventilation can be ensured. Overheating may damage the equipment or result
in fire due to short-circuit.
Power cables and other cables should be run so as to avoid being stepped on or
potential damage from falling objects. Damaged cables may result in short-circuit and
equipment damage as well as potentially fatal electrical shock.
When connecting the supply voltage please note correct polarity. Faulty connections
may damage or destroy the equipment.
Only use the power source specified on the nameplate. Please consult your electrician if
you are unsure whether the power supply on site is appropriate. Only use the supplied
power cables or power adapters or the specified recommended power supplies.
1.3.2 Maintenance and repair
Shut off and unplug the equipment from the power receptacle prior to every cleaning.
Only clean the equipment with a slightly dampened cloth. Do not use harsh cleaners or
spray cans. Using harsh solvents such as thinner or petrol may damage the housing
surface.
Immediately shut off the equipment and promptly disconnect it from the operating
voltage. The following damages must be handled by an authorized service centre:
o Damage to the power supply cable
o If a liquid spilled onto the equipment or an object penetrated the equipment
o If the equipment was exposed to water or another liquid
o If the equipment is not functioning properly despite observing the instructions
in these operating instructions. Only the controls specified in these operating
instructions may be adjusted. Incorrect settings to the other controls may
damage the equipment.
o If the equipment fell to the floor or the housing was damaged
o If the equipment performance is substantially the required performance
Never attempt to maintain the equipment yourself, as this may expose you to hazardous
voltages. Maintenance work should always be performed by qualified personnel only.
Attention:
Opening the appliance will result in loss of warranty. Do not try to repair the
appliance yourself but contact your local distributor or specialist.
_________________________________________________________________________________
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
- 6 -
User manual