Main Menu  Setting  System  Display; Main Menu  Setting  System  Ptz - Santec SCVR-2411K User Manual

User manual
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
7.5.5.2 Main menu  Setting  System  Display
Here you can adjust settings for:
Display
TV adjust
Tour setup
Zero channel
Display: GUI (Graphical User Interface):
You can define what is to be displayed in the video image:
Resolution:
If you change the resolution, you have to reboot the recorder.
Transparency:
Define the transparency of the displayed menu in the video image. 0% means that
the menu is not see-through and the live image cannot be seen here, i.e. the menu
covers the live image.
Time display, channel display:
Define whether the time or the channel name is to be displayed in the live image.
Image enhance:
If enabled, the video image is displayed with less noise
TV adjust
Here you can make adjustments for the screen borders and brightness.
Tour setup:
Enable the tour function here.
Enter the tour interval (5-120 seconds).
Define the window mode.
In the channel group list, double-click on the respective group to edit it.
Click on „Add" to add a channel group to the list.
Click on „Delete" to delete a channel group from the list.
Use the up and down buttons to scroll through the list.
Zero channel:
Enter the settings which are to be used if no camera is connected to the channel.
7.5.5.3 Main menu  Setting  System  Pan/Tilt/Zoom
If a PTZ camera is connected, the following functions are available.
Channel
Control mode
Protocol
Address
Baud rate
Data Bits
Stop Bits
Parity
_________________________________________________________________________________
- 47 -