9.3.1 Displayed information in video image
In the upper left corner of each channel's live view image, the following information is
displayed:
1
1. IP address of recorder
2. Channel number
3. Monitor bit stream
4. M = Main stream; S = Sub stream
In the upper right corner of each channel's live view image, the following functions are
displayed:
1. Digital zoom:
Click on this symbol.
Then click in the live image and keep holding the mouse button to draw an
area to be zoomed in.
Click and hold the left mouse button the move the zoomed image.
Click again on the symbol to return to the previous view. Alternatively, right-
click into the zoomed image.
2. Local recording:
If you click on this symbol, it will change its colour from grey to white and the manual
recording will start. Click again on the white symbol to stop the recording (the symbol
turns grey again).
3. Snapshot:
Click on this symbol to make a snapshot of the current video image.
4. Audio:
Click on this symbol to enable or disable the audio function (sound).
Note: This function is only available if suitable audio devices are connected.
5. Use the cross to close the video image.
_________________________________________________________________________________
2
3
1
2
- 56 -
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
4
3
5
4
User manual