SMC Networks ITV1000 series Operation Manual page 16

③ To "F99" by using the △ and ▽ keys.
④ Press S-key.
Press △ and S keys for 5 seconds or more.
⑤
(press S-key to ③)
"Initialize"
seconds.
⑥
（Release keys till less than 5 seconds
to ④）
Returns to the state immediately after turning on of the power supply.
⑦
(keys are locked)
LED display
The range of the LED pressure display is different according to the
pressure range and the unit of the display.
unit ITV※01※
MPa ｡020∼.120
2
Kgf/cm 0｡20∼.120
bar 0｡20∼.120
PSI 3｡0∼18.0
kPa
(note1)：The mark "｡" is blinking the decimal point, and it is shown a minus.
(note2)：When the digit overflows, the following of "9" are substituted by "A".
(example: The following of 999(kPa) are displayed as A00(kPa), and it
shows 1000 kPa.)
(note3)：When the display exceeds the lower bound value, "
(note4)：When the display exceeds the upper bound value, "
Refer to the SMC website (URL http://www.smcworld.com) for more information
about troubleshooting.
This operation manual refers to all standard types and is partially applicable
to special models.
This operation manual is subject to change without prior notice or any obligation
on the part of the manufacturer.
is executed,
-20∼120
after 5
ITV※03※
｡100∼.600 ｡180∼.A80
1｡00∼6.00 1｡80∼A.80
1｡00∼6.00 1｡80∼A.80
14｡0∼84.0
-100∼600
―16―
⇔
(displayed alternately)
flashes on the display）
is displayed
Turning off for 1 second
ITV※05※ ITV209※
-26∼156
-180∼A80
-
-
-
-
16∼-96
" is displayed.
" is displayed.