Connecting to the VM-114H2C via RS-232 RS-232 and IR Control and Pass-through 5.4.1 RS-232 Control and Pass-through Using the VM-114H2C 5.4.2 Local IR Control and IR Pass-through Using the VM-114H2C Wiring the Twisted Pair RJ-45 Connectors Technical Specifications Default Communication Parameters Default EDID...
Page 3
Contents Tables Table 1: VM-114H2C Front Panel Features Table 2: VM-114H2C Rear Panel Features Table 3: Technical Specifications of the VM-114H2C Table 4: Default Communication Parameters Table 5: Protocol Definitions Table 6: Instruction Codes for Protocol 2000 KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Our 1,000-plus different models now appear in 11 groups that are clearly defined by function. Congratulations on purchasing your Kramer Desktop VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs. The VM-114H2C is ideal for: • Home theater, presentation and multimedia applications •...
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview Overview The high quality VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs is a switcher/distribution amplifier for HDMI and TP (Twisted Pair) signals. It reclocks and equalizes one of two selectable input signals and distributes it to two HDMI and two TP outputs.
Overview Using Shielded Twisted Pair Cable Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the Kramer BC-DGKat623 (CAT 6 23 AWG), and the Kramer BC-DGKat7a23 (CAT 7a 23 AWG) cables.
Defining the VM-114H2C Defining the VM-114H2C Figure 1 Table 1 define the front panel of the VM-114H2C. Figure 1: VM-114H2C Front Panel Table 1: VM-114H2C Front Panel Features Feature Function IR Remote Control Sensor Sensor for the remote control IR transmitter...
Defining the VM-114H2C Figure 2 Table 2 define the rear panel of the VM-114H2C. Figure 2: VM-114H2C Rear Panel Table 2: VM-114H2C Rear Panel Features Feature Function RS-232 9-pin D-sub (F) Connect to a PC or remote controller Connector 12V DC Power Connector...
1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI) connector. 1 Switch off the power on each device before connecting it to your VM-114H2C After connecting your VM-114H2C, switch on its power and then switch on the power on each device...
6. Optional—Connect a PC via RS-232 to the RS-232 port on the VM-114H2C (see Section 5.3). 7. Connect the power adapter to the power socket on the VM-114H2C and to the mains electricity (not shown in Figure 8. Optional—Press the EDID READ button to acquire or change the EDID...
To connect to the VM-114H2C via RS-232: • Connect the RS-232 9-pin D-sub rear panel port on the VM-114H2C unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to...
Figure 4: VM-114H2C RS-232 Control and Pass-through 5.4.2 Local IR Control and IR Pass-through Using the VM-114H2C The VM-114H2C provides an IR sensor and a 3.5mm mini jack for connecting a remote IR emitter or sensor. When the VM-114H2C is connected to suitable...
A DVD player is connected to the TP-573 transmitter via an IR emitter. An LCD display is connected to the TP-574 receiver via an IR emitter. Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP cabling.
An IR sensor is connected to the TP-573 transmitter. An LCD display is connected to the TP-574 receiver via an IR emitter. Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP cabling. Point the LCD display remote control either at the TP-573 IR sensor or at the VM-114H2C IR sensor to control the LCD display.
The first DVD player (player 1) is connected to the TP-573 transmitter via an IR emitter. The second DVD player (player 2) is connected to the VM-114H2C via an IR emitter. An IR sensor is connected to the TP-574 receiver.
Wiring the Twisted Pair RJ-45 Connectors Wiring the Twisted Pair RJ-45 Connectors When using STP cable, connect/solder the cable shield to the RJ-45 connector shield. Figure 8 defines the TP pinout using a straight pin-to-pin cable with RJ-45 connectors. Note, that the cable Ground shielding must be connected/soldered to the connector shield.
ACCESSORIES: Power supply, RC-IR3 infrared remote control transmitter OPTIONS: HDMI/HDMI male-to-male cables, RK-1 19” rack adapter Default Communication Parameters Table 4 lists the default communication parameters for the VM-114H2C. Table 4: Default Communication Parameters RS-232 Protocol 2000 Baud Rate: 9600...
Default EDID Default EDID The factory default EDID is listed below. Monitor Model name....VM114H2C Manufacturer..... KRM Plug and Play D..KRM0114 Serial number.... 505-707455010 Manufacture date..2009, ISO week 10 ------------------------- EDID revision.... 1 3 Input signal type..Digital Color bit depth..
(implement) the command, and the addressed machine will reply For a single machine controlled via the serial port, always set M4 M0 = 1, and make sure that the machine itself is configured as MACHINE NUMBER = 1 KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Kramer Protocol 2000 Table 6: Instruction Codes for Protocol 2000 Note: All values in the table are decimal, unless otherwise stated INSTRUCTION DEFINITION FOR SPECIFIC INSTRUCTION NOTE DESCRIPTION INPUT OUTPUT SWITCH V DEO Set equal to video input Set equal to video output which is...
Page 24
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.