SPECIFICATIONS How do I Get Started? UNPACKING AND CONTENTS Optional Accessories VM SERIES AMPLIFIERS Getting to Know Your VM-1110 Amplifier Getting to Know Your VM-1610 Amplifier Getting to Know Your VM-5AD Amplifier Getting To Know Your VM-80A Amplifier INSTALLATION Rack Mounting...
In addition to the Kramer line of high quality amplifiers, such as the one you have just purchased, Kramer also offers a full line of high quality switchers, processors, interfaces, controllers and computer-related products.
You don’t even have to read the whole manual, focus on the relevant sections. UNPACKING AND CONTENTS The items contained in your Kramer VM amplifier package are listed below. Please save the original box and packaging materials for possible future transportation and shipment of the amplifier. Amplifier...
The KRAMER VM-1110 is a full spec, state-of-the-art, 1:10 balanced audio distribution amplifier designed for studio and other demanding applications. The VM-1110 splits the input source into ten identical outputs with no discernible signal degradation. The VM-1110 has two inputs and can be programmed by the user to function as a 1:10 Mono DA or as a 2 x 1:5 (stereo) DA.
Getting to Know Your VM-1610 Amplifier The KRAMER VM-1610 is a full spec, state-of-the-art, 1:10 balanced stereo audio distribution amplifier designed for studio and other demanding applications. The VM-1610 has two inputs and can be programmed by the user to function as a 1:10 or as a 2 x 1:5 DA. State-of-the-art Bi-Fet amplifying circuitry and a high power discrete buffering system make the VM-1610 an excellent performer.
Getting to Know Your VM-5AD Amplifier The KRAMER VM-5AD is a full spec, state-of-the-art, 1:5 balanced audio distribution amplifier designed for studio and other demanding applications. The VM-5AD splits a single input source, either mono balanced or stereo unbalanced into five identical outputs without any discernible signal degradation.
Getting To Know Your VM-80A Amplifier The KRAMER VM-80A is a Broadcast quality, state-of-the-art, balanced stereo audio distribution amplifier designed for demanding applications, such as broadcast and production studios. The VM- 80A has two balanced stereo audio inputs, each splitting the input source into four identical outputs.
The VM-80A and VM-5AD amplifiers require a special (see section 4.1) rack adapter (contact your KRAMER dealer) to be mounted in the 1U rack. For installation of the VM-80A and VM-5AD, follow the instructions, in the installation guide, enclosed with the adapter.
These programming switches illuminate as the selection is made and function as follows: 1:10 position - splits channel "1" Input (VM-1610) or input "A" (VM-1110) to all 10 outputs. 2x1:5 position - splits channel "1" and channel "2" inputs " to outputs "1-5" of channels "1" and "2"...
Some useful tips: Use two mono Das as one stereo balanced DA. Use a dual channel DA (VM-1110 for example) for maximal studio flexibility. Do not use excessively long cables if possible, as signal quality may degrade rapidly. Use best cables and connectors (XLRs).
If not, turn the power switch off and on again to reset the machine. 2. If the recommended actions still do not result in satisfactory operation, please consult your KRAMER Dealer. 10.1 Power And Indicators Problem Remedy No Power Confirm that the rocker switch is in the “ON”...
Problem Remedy Low frequency hum in 60Hz hum (ground loop) is caused by a difference in the ground the output signal potential of any two or more devices connected to your signal path. This difference is compensated by passing that voltage difference through any available interconnection, including your audio cables.
Page 15
3. Shipping charges. HOW YOU CAN GET WARRANTY SERVICE 1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center. 2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product.
Page 16
EXCLUSION OF DAMAGES Kramer’s liability for any defective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 17
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user manual may be found at http://www.kramerelectronics.com/manuals.html. We welcome your questions, comments and feedback. Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.com...