Table of Contents
Advertisement
7
Alarms
The system continuously checks for dangerous situations and
system faults while the system is running. The alarm system can be
activated if any alarm settings are exceeded.
Alarm indication
An alarm situation is indicated with an alarm pop-up. If you have
enabled the siren, the alarm message is followed by an audible
alarm.
A single alarm is displayed with the name of the alarm as the title,
and with details for the alarm.
If more than one alarm is activated simultaneously, the alarm pop-
up can display 2 alarms. The alarms are listed in the order they occur
with the alarm activated first at the top. The remaining alarms are
available in the Alarms dialog.
Type of messages
The messages are classified according to how the reported situation
affects your vessel. The following color codes are used:
Color
Red
Orange
Yellow
Blue
Green
Acknowledging the alarms
The most recent alarm is acknowledged by pressing the Enter key.
This removes the alarm notification, and silences the alarm from all
units that belong to the same alarm group. A reminder reappears at
given intervals for as long as the alarm condition exists.
Ú Note:
An alarm received from non Navico units on the network
must be acknowledged on the unit generating the alarm.
Alarms
| Triton2 Operator manual
Importance
Critical
Important
Standard
Warning
Light warning
57
Hide quick links:
Advertisement
Table of Contents
