Autopilot; Safe Operation With The Autopilot - B&G Triton2 Operator's Manual

Multi-purpose display
Table of Contents

Advertisement

6
38

Autopilot

If a compatible autopilot computer is connected to the system,
autopilot functionality is available in the system.
The system does not allow for more than one autopilot computer
on the network.
The display unit automatically detects the autopilot computer
available on the network and presents settings, configuration and
user options for the connected computer.
For details about installing and configuring an autopilot computer,
refer to the separate manuals that come with the autopilot
computer.

Safe operation with the autopilot

Warning:
An autopilot is a useful navigational aid,
but DOES NOT replace a human navigator.
Warning:
Ensure the autopilot has been installed
correctly, commissioned and calibrated before use.
Ú Note:
You can disengage the autopilot at any time by pressing
the STBY key on the Triton
Do not use automatic steering when:
In heavy traffic areas or in narrow waters
In poor visibility or extreme sea conditions
When in areas where use of an autopilot is prohibited by law
When using an autopilot:
Do not leave the helm unattended
Do not place any magnetic material or equipment near the
heading sensor used by the autopilot system
Verify at regular intervals the course and position of the vessel
Always switch to Standby mode and reduce speed in due time to
avoid hazardous situations
Autopilot
| Triton2 Operator manual
2
Pilot controller.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents