Trip Log - B&G Triton2 Operator's Manual

Start
Starts the Race timer. If the timer was stopped and not reset, the
timer will continue counting from the time it had when it was
stopped.
Reset
Resets the Race timer to the start value.
Rolling timer
Restarts the countdown timer every time it reaches zero. It will
continue to do this until the timer is stopped or until this option is
de-selected.
Auto start trip
Enables the Trip log to record time and mileage from the moment
the countdown timer begins counting up from zero.
Set start value
To count down to a race start, a time value can be set in the Set start
value field.
When a time is present in the start value field the Race timer will
begin to count down from that number when the timer is started.
Once the time reaches zero it will begin counting up recording the
elapsed time.

Trip log

There are three log options available:
29
Race timer and Trip log | Triton2 Operator manual