Selecting A Target; Ais Page Display Options - B&G Triton2 Operator's Manual

32
Selected AIS target, activated by selecting a target
symbol.
The target returns to the default target symbol when
the cursor is removed from the symbol.
AIS SART (AIS Search And Rescue Transmitter).

Selecting a target

You use the arrow keys to select individual AIS targets on the AIS
page. When selected the target symbol change to a selected AIS
target symbol.

AIS page display options

The following options are available for displaying the AIS targets:
Range
Defines the display range on the AIS page. Selected range is
indicated in the lower right corner of the AIS page.
Icon filters
By default, all targets within the selected range are shown on the
AIS page. You can select to hide safe AIS vessels, and to not show
targets based on vessel speed.
Extension lines
Defines the length of course over ground and heading extension
lines for your own vessel and for other vessels.
The length of the extension lines is set to indicate the distance the
vessel will move in the selected time period.
Your own vessel heading information is read from the active
heading sensor, and COG information is received from the active
GPS. For other vessels COG data is included in the message received
from the AIS system.
AIS | Triton2 Operator manual