B&G Triton2 Operator's Manual page 26

26
Creating/editing a custom page
A custom page is created in a two steps process:
• Replacing one of the active pages with a template page (ref
above)
• Selecting data for the template page's field(s)
Ú Note:
If the template page has multiple data fields you use the
arrow keys to select active field.
You can later change the data for any fields in a custom page.
Changing the range scale on analog pages
You can change the range scale for some full screen analog pages
by pressing the arrow keys.
Ú Note:
If the actual recorded data is greater than the selected
analog scale, the analog needle will remain at the highest point
on the scale. The digital window in the center of the display will
show the actual value.
Pages | Triton2 Operator manual