Autopilot; Wiring The Autopilot System - B&G Zeus Touch Installation Manual

12
1
2
3
4
5
6
7
8
9

Autopilot

The B&G Zeus Touch includes complete autopilot integration. When Zeus Touch is connected
to a compatible B&G Autopilot Computer (AC12N, AC42N, and SG05), you will have complete
control, setup and integration with your autopilot. The Zeus Touch display can be used in
conjunction with B&G Triton Autopilot Control units or the Zeus Touch can be used alone to
conserve dash space.

Wiring the autopilot system

Using the AC12N or AC42N autopilot computer
The AC12N/AC42N is connected to the Zeus Touch system using the NMEA 2000 network.
For more information about how to install and wire the autopilot, refer to the separate
AC12N/AC42N Installation manual.
1
Zeus Touch Display
Pump / Drive (RPU160, RPU300, DD15, HDL2000x)
AC12N or AC42N Autopilot computer
Triton Pilot Controller
DC Supply
NMEA 2000 Micro-C backbone with T-pieces
RC42N Rate Compass
RF25N Rudder Feedback
Alarm Buzzer (optional)
2
3
9
6
7
Autopilot |
4
+
12-24 V DC
5 Amp Fuse
+
12 V DC
8
Zeus Touch installation manual
-
5
-
| 41