Conformity With European Directives; Improper Device Modifications - Siemens SITRANS P DS III Operating Instructions Manual

Safety information

2.2 Improper device modifications

2.1.2

Conformity with European directives

The CE mark on the device is a sign of conformity with the following European directives:
Electromagnetic
Compatibility EMC
2004/108/EC
Atmosphère explosible
ATEX
94/9/EC
Pressure Equipment
Directive PED
97/23/EC
The standards applied can be found in the EC declaration of conformity for the device.
2.2 Improper device modifications
Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
16
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive
89/336/EEC.
Directive of the European Parliament and the Council on the
approximation of the laws of the Member States concerning
equipment and protective systems intended for use in
potentially explosive atmospheres.
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States concerning
pressure equipment.
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07